Visual doorbell installation operation method introduction

August 31, 2023

[ Pacific Security Network News ]

The following small series should introduce the operation method of Video Doorbell installation. Everyone knows that in China, video doorbell is a convenient and practical product, and it has been generally entered into high-rise residential buildings in urban communities. This article is a small series for everyone to explain in detail the visual doorbell installation method and the corresponding precautions.

Video doorbell installation method:

1. Indoor unit: Vertically fix the indoor unit wall bracket (hook up) at the standard height. After connecting and checking the line, insert the connection between the indoor unit and the terminal board into the corresponding connection port, and then slide the indoor unit down the hook. Push it to the bottom and finally fix it with the screw from the right side

2. Outdoor unit: After the outdoor unit base is vertically fixed at the standard height, the connected outdoor unit is snapped into the seat from the upper end and pressed at the lower end, and then the bottom hook is locked with a fixing screw.

Video doorbell installation operation method

1. When the visitor presses the “call button” of the outdoor unit, the indoor unit sends a “叮-咚” electronic ringtone, and the display screen displays the visitor image.

2, pick up the call handle, you can talk to the visitor for 90 seconds; do not pick up the call handle, after 30 seconds, the display screen automatically disappears and shuts down.

3. When the “monitor button” is activated, the display is turned on for about 30 seconds, and the door can be monitored.

4. If the system is connected with an electric lock, you can press the “unlock button” to open during monitoring and talking, and the power/function indicator color will prompt the unlock operation.

5, adjust the contrast (CONTRAST) can make the image too bright, too dark or unclear to achieve a satisfactory result.

6. Adjust the brightness (BRIGHT) to change the brightness of the image to achieve the best image.

7. Adjust the volume (VOLUME) on the back of the extension to make the “叮-咚” electronic bell sound satisfactory.

Precautions for visual doorbell installation:

1. All components should avoid strong vibration, and should not be bumped, knocked or dropped to avoid damage.

2. Do not use a damp cloth or hand to wipe the lens and the development screen.

3. Wipe with a soft cotton fabric. Do not use organic solvents or chemical cleaners. If necessary, clean the stains with a little water or diluted soapy water.

4, the outdoor unit should be protected against rain and snow, anti-sun, and other strong light sources.

5, to stay away from strong electromagnetic field appliances such as televisions, computers, so as not to affect the image quality.

6. Keep away from moisture, high temperature, dusty, corrosive and oxidizing gas to avoid damage.

7. There is high voltage in the machine, and non-professionals are forbidden to open.

8. A power adapter supplied by the manufacturer or approved by the manufacturer must be used.

Author:

Ms. Natelie

E-mail:

Natelie_Huang@zh-mingke.com

Phone/WhatsApp:

8615875669203