Home> Blog> Introduction to simple and practical voice-activated electronic doorbell circuit

Introduction to simple and practical voice-activated electronic doorbell circuit

November 01, 2022
1206RGB (single)
Single chip microcomputer STM32L151CCU6
Probe domestic switch needle KG300B head diameter 3.0 normally closed switch needle total length is 5
0201 package SLP0603 ESD electrostatic diode 5V one-way ESD
Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22


When using this circuit as a doorbell, it is not necessary to install a push button switch in front of the door. The visitor only needs to click on the door and the doorbell will sound. The circuit is as shown.

The biggest feature of the circuit is the use of the speaker for vibration input, and the doorbell output.

The transistor V2, the potentiometer KP and the capacitor C2 constitute a control circuit, and V1, V3, R2, and C1 constitute a complementary oscillator. When the switch S is turned on and the power is turned on, the power supply charges the C2 through the BE junction of C2 and V2 and the speaker BL. The larger instantaneous charging current makes the V2 saturation turn on, clamping the collector potential of V3; after the charging of C2 is finished, The power supply provides a base current to V2 via KP to maintain the critical saturation state of V2, rendering the oscillator inoperative. When the external acoustic wave vibrates the speaker cone, an induced voltage is generated across the speaker. This voltage is applied to the emitter of V2, causing V2 to exit the critical saturation region and enter the amplification region. The voltage drop between the collector and the emitter of V2 increases. Thereby the oscillator oscillates and the BL emits an audio call. Release the call to disconnect S and then close. VI selects 3DG6, 3DG6, B>=80; V3 selects 3AX31, B>=60; V2 selects 3DG6, B>=100. BL selects 8 um speaker and installs it in the upper middle part of the inner side of the door panel. The transistor transistor is a device composed of three layers of impurity semiconductors, and has three electrodes, so it is also called a semiconductor transistor, a transistor, etc., and can be used for detection, rectification, amplification, switching, voltage stabilization, signal modulation, and many other functions.

Contact Us

Author:

Ms. Natelie

Phone/WhatsApp:

8615875669203

Popular Products
Company News
You may also like
Related Information
Visual doorbell installation operation method introduction

Why we need Video Door Phone For Home? As we know, video door phone that allows you to see, hear, and speak to the visitor at your door whether you`re at home, at work.

Visual doorbell installation operation method introduction

[ Pacific Security Network News ] The following small series should introduce the operation method of video doorbell installation. Everyone knows that in China, video doorbell is a convenient and...

Visual doorbell installation operation method introduction

[ Pacific Security Network News ] The following small series should introduce the operation method of video doorbell installation. Everyone knows that in China, video doorbell is a convenient and...

Electronic doorbell how to choose electronic doorbell working principle

With the improvement of people's living standards, electronic doorbells are gradually used to people's lives. At present, electronic doorbells have a wide range of product types and various types....

Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be betwwen 20-8000 characters

Contact Us

Author:

Ms. Natelie

Phone/WhatsApp:

8615875669203

Popular Products
Company News
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send